Custom Coupler
-
1/2 inch diameter AL rod, 1-1/2 inches long
-
Bore 1/4 inch hole 0.75 - 0.80 inches deep
-
Drill #21, Tap 10-32 hole 0.6 inches from open end
-
Insert 3/16-24 x 1/4" hex head set screw
-
Drill #29, Tap 8-32 hole 0.825 inches from open end
-
Mount wheel using 8-32 x 3/4 cap head screw
Coupler Part with Gear Motor Axle
 |
large |
| Coupler 3D Model | |
CategoryDesign CategoryPlans